École de technologie supérieure (ÉTS), Laboratory of Space technologies, Embedded System, Navigation and Avionics (LASSENA), 1100 rue Notre Dame Ouest, Montreal (QC), H3C 1K3, Canada
École de technologie supérieure (ÉTS), Laboratory of Space technologies, Embedded System, Navigation and Avionics (LASSENA), 1100 rue Notre Dame Ouest, Montreal (QC), H3C 1K3, Canada
The horizontal positional accuracy of Google Earth is assessed in the city of Montreal, Canada, using the precise coordinates of ten GPS points spatially distributed all over the city. The results show that the positional accuracy varies in the study area between ∼0.1 m in the south to ∼2.7 m in the north. Furthermore, two methods are developed for correcting the observed positional errors: (a) using a set of transformation parameters between true coordinates of the geodetic points and their coordinates in Google Earth, and by (b) interpolating the misfit vectors at the geodetic points. The former method reduces the overall accuracy to ∼67 cm RMSE, whereas the latter one practically removes all the distortion (RMSE = 1 cm). Both methods can be developed for other places in the world subject to availability of appropriate control points. In addition, a displacement problem caused by the topography of the area and the viewing angle of the imaging satellite is discussed, and it is shown that the true positions can be shifted even up to several meters, as a consequence.
Goudarzi, M. A., & Landry, R. J. (2017). Assessing horizontal positional accuracy of Google Earth imagery in the city of Montreal, Canada. Geodesy and Cartography, 43(2), 56-65. https://doi.org/10.3846/20296991.2017.1330767
Authors who publish with this journal agree to the following terms
that this article contains no violation of any existing copyright or other third party right or any material of a libelous, confidential, or otherwise unlawful nature, and that I will indemnify and keep indemnified the Editor and THE PUBLISHER against all claims and expenses (including legal costs and expenses) arising from any breach of this warranty and the other warranties on my behalf in this agreement;
that I have obtained permission for and acknowledged the source of any illustrations, diagrams or other material included in the article of which I am not the copyright owner.
on behalf of any co-authors, I agree to this work being published in Geodesy and Cartography as Open Access, and licenced under a Creative Commons Licence, 4.0 https://creativecommons.org/licenses/by/4.0/legalcode. This licence allows for the fullest distribution and re-use of the work for the benefit of scholarly information.
For authors that are not copyright owners in the work (for example government employees), please contact VILNIUS TECH to make alternative agreements.